Scientific Publications

Zhang, H., Boothby, K. & Kamenev, A. Cyclic quantum annealing: searching for deep low-energy states in 5000-qubit spin glass. Sci Rep 14, 30784 (2024). https://doi.org/10.1038/s41598-024-80761-z

Quantum computers promise a qualitative speedup in solving a broad spectrum of practical optimization problems. The latter can be mapped onto the task of finding low-energy states of spin glasses, which is known to be exceedingly difficult. Using D-Wave’s 5000-qubit quantum processor, we demonstrate that a recently proposed iterative cyclic quantum annealing algorithm can find deep low-energy states in record time. We also find intricate structures in a low-energy landscape of spin glasses, such as a power-law distribution of connected clusters with a small surface energy. These observations offer guidance for further improvement of the optimization algorithms.

Thomas Lubinski, Carleton Coffrin, Catherine McGeoch, Pratik Sathe, Joshua Apanavicius, David Bernal Neira, Quantum Economic Development Consortium(QED-C) Collaboration

ACM Transactions on Quantum Computing, Volume 5, Issue 3

Catherine McGeoch, D-Wave; David Esteban Bernal Neira, Purdue University; Susan Mniszewski, Los Alamos National Laboratory; Nicholas Chancellor, Durham University 

The past decade has seen four generations of quantum annealing processors, with qubit counts increasing from 512 on the D-Wave Two (released in 2013), to over 5000 on Advantage processors available in 2023. During this time, expanding access for researchers has sparked enormous growth in publications and in the body of knowledge surrounding capabilities, applications, and best practices in use of these novel computing systems.

This Research Topic will invite submissions on all aspects of empirical experience with annealing-based quantum computers. The intention is to present a broad survey of the current state of knowledge about quantum annealing hardware, performance, software infrastructures, and application

Abhishek Awasthi∗, Nico Kraus†, Florian Krellner‡, David Zambrano† ∗BASF Digital Solutions GmbH, Ludwigshafen am Rhein, Germany †Aqarios GmbH, Munich, Germany
‡SAP SE, Walldorf, Germany

This work is a benchmark study for quantum- classical computing method with a real-world optimization problem from industry. The problem involves scheduling and balancing jobs on different machines, with a non-linear objective function. We first present the motivation and the problem description, along with different modeling techniques for classical and quantum computing. The modeling for classical solvers has been done as a mixed-integer convex program, while for the quantum-classical solver we model the problem as a binary quadratic program, which is best suited to the D-Wave Leap’s Hybrid Solver. This ensures that all the solvers we use are fetched with dedicated and most suitable model(s). Henceforth, we carry out benchmarking and comparisons between classical and quantum-classical methods, on problem sizes ranging till approximately 150, 000 variables. We utilize an industry grade classical solver and compare its results with D-Wave Leap’s Hybrid Solver. The results we obtain from D-Wave are highly competitive and sometimes offer speedups, compared to the classical solver.

Pérez Armas, L.F., Creemers, S. & Deleplanque, S. Solving the resource constrained project scheduling problem with quantum annealing. Scientific Reports14, 16784 (2024). 

Quantum annealing emerges as a promising approach for tackling complex scheduling problems such as the resource-constrained project scheduling problem (RCPSP). This study represents the first application of quantum annealing to solve the RCPSP, analyzing 12 well-known mixed integer linear programming (MILP) formulations and converting the most qubit-efficient one into a quadratic unconstrained binary optimization (QUBO) model. We then solve this model using the D-wave advantage 6.3 quantum annealer, comparing its performance against classical computer solvers. Our results indicate significant potential, particularly for small to medium-sized instances. Further, we introduce time-to-target and Atos Q-score metrics to evaluate the effectiveness of quantum annealing and reverse quantum annealing. The paper also explores advanced quantum optimization techniques, such as customized anneal schedules, enhancing our understanding and application of quantum computing in operations researc

N. Nikmehr, P. Zhang, H. Zheng, T. -C. Wei, G. He and Y. A. Shamash, "Quantum Annealing-Infused Microgrids Formation: Distribution System Restoration and Resilience Enhancement," in IEEE Transactions on Power Systems, DOI: 10.1109/TPWRS.2024.3399122

In this paper, the use of quantum computing is explored to solve a crucial optimization problem in the formation of microgrids (MGs), which can enhance the resilience of distribution networks against natural disasters or faults. The study focuses on developing a quantum-inspired optimization model for critical load restoration via MGs formation, leveraging the power of quantum annealing to solve complex combinatorial problems that classical methods struggle with. The Constrained Quadratic Model (CQM) solver from D-Wave is used to merge classical and quantum optimization approaches, delivering improved solutions to complex optimization problems. The solver has been optimized to take advantage of quantum computing's parallelism to provide high-performance solutions. The study compares outcomes from the D-Wave hybrid quantum-classical solver and the classical Gurobi solver, underscoring the effectiveness of quantum computing in addressing resilience-oriented optimization challenges. This assessment is validated through two case studies: the IEEE 37-bus system and the IEEE 240-bus distribution system.

Pelofske, E., Bärtschi, A. & Eidenbenz, S. Short-depth QAOA circuits and quantum annealing on higher-order ising models. npj Quantum Information 10, 30 (2024). 

We present a direct comparison between QAOA (Quantum Alternating Operator Ansatz), and QA (Quantum Annealing) on 127 qubit problem instances. QAOA with p = 1, 2 rounds is executed on the 127 qubit heavy-hex graph gate-model quantum computer ibm_washington, using on-device grid-searches for angle finding, and QA is executed on two Pegasus-chip D-Wave quantum annealers. The problems are random Ising models whose connectivity matches heavy-hex graphs and the Pegasus graph connectivity, and optionally include hardware-compatible cubic terms (ZZZ terms). The QAOA circuits are heavily optimized and of extremely short depth, with a CNOT depth of 6 per round, which allows whole chip usage of the heavy-hex lattice. QAOA and QA are both compared against simulated annealing and the optimal solutions are computed exactly using CPLEX. The noiseless mean QAOA expectation values for p = 1, 2 are computed using classical light-cone based simulations. We find QA outperforms QAOA on the evaluated devices.

Andrew D. King, et al.

Quantum computers hold the promise of solving certain problems that lie beyond the reach of conventional computers. Establishing this capability, especially for impactful and meaningful problems, remains a central challenge. One such problem is the simulation of nonequilibrium dynamics of a magnetic spin system quenched through a quantum phase transition. State-of-the-art classical simulations demand resources that grow exponentially with system size. Here we show that superconducting quantum annealing processors can rapidly generate samples in close agreement with solutions of the Schrödinger equation. We demonstrate area-law scaling of entanglement in the model quench in two-, three- and infinite-dimensional spin glasses, supporting the observed stretched-exponential scaling of effort for classical approaches. We assess approximate methods based on tensor networks and neural networks and conclude that no known approach can achieve the same accuracy as the quantum annealer within a reasonable timeframe. Thus quantum annealers can answer questions of practical importance that classical computers cannot.

Anders Irbäck, Lucas Knuthson, Sandipan Mohanty, and Carsten Peterson, Using quantum annealing to design lattice proteins, Phys. Rev. Research 6, 013162 

Quantum annealing has shown promise for finding solutions to difficult optimization problems, including protein folding. Recently, we used the D-Wave Advantage quantum annealer to explore the folding problem in a coarse-grained lattice model, the HP model, in which amino acids are classified into two broad groups: hydrophobic (H) and polar (P). Using a set of 22 HP sequences with up to 64 amino acids, we demonstrated the fast and consistent identification of the correct HP model ground states using the D-Wave hybrid quantum-classical solver. An equally relevant biophysical challenge, called the protein design problem, is the inverse of the above, where the task is to predict protein sequences that fold to a given structure. Here, we approach the design problem by a two-step procedure implemented and executed on a D-Wave machine. In the first step, we perform a pure sequence-space search by varying the type of amino acid at each sequence position, and seek sequences which minimize the HP-model energy of the target structure. After mapping this task onto an Ising spin-glass representation, we employ a hybrid quantum-classical solver to deliver energy-optimal sequences for structures with 30–64 amino acids, with a 100% success rate. In the second step, we filter the optimized sequences from the first step according to their ability to fold to the intended structure. In addition, we try solving the sequence optimization problem using only the quantum processing unit (QPU), which confines us to sizes ≤20, due to exponentially decreasing success rates. To shed light on the pure QPU results, we investigate the effects of control errors caused by an imperfect implementation of the intended Hamiltonian on the QPU, by numerically analyzing the Schrödinger equation. We find that the simulated success rates in the presence of control noise semiquantitatively reproduce the modest pure QPU results for larger chains.

Alejandro Lopez-Bezanilla, Andrew D. King, Cristiano Nisoli, and Avadh Saxena 

Nature Communications volume 15, Article number: 589 (2024) 

Fluctuations may induce the degradation of order by overcoming ordering interactions, consequently leading to an increase of entropy. This is particularly evident in magnetic systems characterized by nontrivial, constrained disorder, where thermal or quantum fluctuations can yield counterintuitive forms of ordering. Using the proven efficiency of quantum annealers as programmable spin system simulators, we present a study based on entropy postulates and experiments on a platform of programmable superconducting qubits to show that a low level of uncertainty can promote ordering in a system impacted by both thermal and quantum fluctuations. A set of experiments is proposed on a lattice of interacting qubits arranged in a triangular geometry with precisely controlled disorder, effective temperature, and quantum fluctuations. Our results demonstrate the creation of ordered ferrimagnetic and layered anisotropic disordered phases, displaying characteristics akin to the elegant order-by-disorder phenomenon. Extensive experimental evidence is provided for the role of quantum fluctuations in lowering the total energy of the system by increasing entropy and defect clustering. Our thorough and comprehensive application of an intentionally introduced noise on a quantum platform provides insight into the dynamics of defects and fluctuations in quantum devices, which may help to reduce the cost associated with quantum processing.

Humberto Munoz Bauza, Daniel A. Lidar, Scaling Advantage in Approximate Optimization with Quantum Annealing, arXiv:2401.07184 

Quantum annealing is a heuristic optimization algorithm that exploits quantum evolution to approximately find lowest energy states. Quantum annealers have scaled up in recent years to tackle increasingly larger and more highly connected discrete optimization and quantum simulation problems. Nevertheless, despite numerous attempts, a computational quantum advantage in exact optimization using quantum annealing hardware has so far remained elusive. Here, we present evidence for a quantum annealing scaling advantage in approximate optimization. The advantage is relative to the top classical heuristic algorithm: parallel tempering with isoenergetic cluster moves (PT-ICM). The setting is a family of 2D spin-glass problems with high-precision spin-spin interactions. To achieve this advantage, we implement quantum annealing correction (QAC): an embedding of a bit-flip error-correcting code with energy penalties that leverages the properties of the D-Wave Advantage quantum annealer to yield over 1,300 error-suppressed logical qubits on a degree-5 interaction graph. We generate random spin-glass instances on this graph and benchmark their time-to-epsilon, a generalization of the time-to-solution metric for low-energy states. We demonstrate that with QAC, quantum annealing exhibits a scaling advantage over PT-ICM at sampling low energy states with an optimality gap of at least 1.0%. This amounts to the first demonstration of an algorithmic quantum speedup in approximate optimization.

Lopez-Bezanilla, A., Raymond, J., Boothby, K. et al. Kagome qubit ice. Nat Commun 14, 1105 (2023). https://doi.org/10.1038/s41467-023-36760-1

Topological phases of spin liquids with constrained disorder can host a kinetics of fractionalized excitations. However, spin-liquid phases with distinct kinetic regimes have proven difficult to observe experimentally. Here we present a realization of kagome spin ice in the superconducting qubits of a quantum annealer, and use it to demonstrate a field-induced kinetic crossover between spin-liquid phases. Employing fine control over local magnetic fields, we show evidence of both the Ice-I phase and an unconventional field-induced Ice-II phase. In the latter, a charge-ordered yet spin-disordered topological phase, the kinetics proceeds via pair creation and annihilation of strongly correlated, charge conserving, fractionalized excitations. As these kinetic regimes have resisted characterization in other artificial spin ice realizations, our results demonstrate the utility of quantum-driven kinetics in advancing the study of topological phases of spin liquids.

Mohammad H. Amin, et al.

Quantum Error Mitigation (QEM) presents a promising near-term approach to reduce error when estimating expectation values in quantum computing. Here, we introduce QEM techniques tailored for quantum annealing, using Zero-Noise Extrapolation (ZNE). We implement ZNE through zero-temperature extrapolation as well as energy-time rescaling. We conduct experimental investigations into the quantum critical dynamics of a transverse-field Ising spin chain, demonstrating the successful mitigation of thermal noise through both of these techniques. Moreover, we show that energy-time rescaling effectively mitigates control errors in the coherent regime where the effect of thermal noise is minimal. Our ZNE results agree with exact calculations of the coherent evolution over a range of annealing times that exceeds the coherent annealing range by almost an order of magnitude.

Pokharel, B., Izquierdo, Z.G., Lott, P.A. et al. Inter-generational comparison of quantum annealers in solving hard scheduling problems. Quantum Inf Process 22, 364 (2023). 

We compare the performance of four quantum annealers, the D-Wave Two, 2X, 2000Q, and Advantage in solving an identical ensemble of a parametrized family of scheduling problems. These problems are NP-complete and, in fact, equivalent to vertex coloring problems. They are also practically motivated and closely connected to planning problems from artificial intelligence. We examine factors contributing to the performance differences while separating the contributions from hardware upgrades, support for shorter anneal times, and possible optimization of ferromagnetic couplings. While shorter anneal times can improve the time to solution (TTS) at any given problem size, the scaling of TTS with respect to the problem size worsens for shorter anneal times. In contrast, optimizing the ferromagnetic coupling improves both the absolute TTS and the scaling. There is a statistically significant improvement in performance between D-Wave Two and 2X and from all older generation annealers to Advantage, even when operated under identical anneal time and ferromagnetic couplings. However, the performance improvement from 2X to 2000Q requires the anneal time and ferromagnetic couplings to be optimized. Overall, owing to these inter-generational hardware improvements and optimizations, the scaling exponent reduces from 1.01 ± 0.01 on Two to 0.259 ± 0.008 on Advantage.